Sunny Health & Fitness Heavy Duty Treadmill for Home, 20” Wide Deck, 15 Level Auto Incline, 300 LB Weight Capacity, Foldable Running Machine, Digital Monitor, Free SunnyFit App Bluetooth Connection

Top notch product !
Quality product , assembled very easy it is a heavy unit , we paid to have it delivered to our room of choice well worth the little extra money we spent . The hardest part was getting rid of the cardboard and styrofoam from the box . Dont hesitate to buy this unit if you’re looking for a good treadmill !!

Sturdy, well-made, 20” wide treadmill – great product
The T7643 was delivered on-time, 2 days ago to our driveway by UPS heavy item delivery, and we used wheeled cart to get it in house, unpacked it and brought it upstairs to the exercise room. The next day we assembled it and used entire 1oz oil bottle to lubricate the metal plate “running board” under belt. We turned it on and the computer display did not light, but the motor ran just fine. We suspected this happened because of very poor instructions about assembling the console head. They do not tell you, but you need to cut a plastic cable tie that is holding the connector at the console end of one upright pole. If you do not cut that cable tie which we now know is used to keep the cable connector from falling down inside the upright tube until you assemble the unit , you’ll crush the connector and possibly snap one of the wires in the cable when you put the console head on the upright poles. For our unit, the red wire inside the plastic tubing was found to be crushed and broken. I had to use a soldering iron and re-join the red wire with a piece of heat shrink tubing ready to slide over the now soldered joint to fix it. It works fine now. Shame on them for bad instructions.We had to do a bunch of adjusting on the belt, first loosening it so it was even possible to get a hand between the belt and a metal plate under it to apply the silicone oil, and then as the belt wore in with use, adjust it so that it was centered and at the proper tension. Once again, the instructions were between nonexistent and abysmal on lubricating the belt and on measuring the proper tension. Here is a list of all the bad or nonexistent instructions they provided for assembly by instruction book step number:Step 3: With one person holding console above poles, have the other person plug-in the connector from top of right side pole and then have them cut that cable tie that was holding the cable at the end of the pole before proceeding. The cable tie is white nylon and is like a strap going through one of the bolt holes. Discard it. Make sure the cable is not being damaged and gently put the console in place on top of poles and put provided screws into the holes and tighten.Step 5: Instructions should say loosen the bolt E12 and remove it with its plastic washer (“pad”).Step 6: After you fold, or stand up, the belt unit and it latches in the vertical position, now remove the bolt and plastic washer (“pad“) at the other end of the short safety cable called the “safety block”, from what you started removing in step 5. Those are the parts they tell you to save even though you only need them in shipping, but if you lose one of the assembly screws, they have the same size as safety block screws you removed, so you will have spares.Step 8: Well, there should be a step eight with some serious explanation about lubricating the treadmill belt before first use. All they have is a circled note pointing you to page 12 that has precious little information. This extra information will help when used in addition to what they provide on page 12:If the running belt is too tight for you to lift it and fit your hand under it with the uncapped and opened bottle of oil, you must loosen the running belt before trying to lubricate the running board for the first time. Turn the belt adjusting mechanism using the Allen wrench, one turn on each side until you loosened it by about six or more turns, just enough to make that belt loose enough to get your hand under it. As such you can barely reach halfway across underneath the belt with the oil bottle. Squirt a stream of oil reaching in from one side of the belt, as you pull the oil bottle out. Use your foot to then step on and pull the belt to roll it and make it move toward the back of the treadmill to begin spreading the oil out. Now step around to the other side of the machine and do the same thing for the other half of the belt. Do not get any oil on the top of the belt. When they say one side or the other side they don’t mean top and bottom of belt. They mean left and right side of the treadmill. You may have to squirt the oil and extra time on each side if you haven’t yet used up the bottle. Use up the entire 1 ounce bottle in this lubricating process on a new treadmill. It helps if you spread the oil around on the running board with a small paper towel, or nitrile gloves, or some other method. It is difficult to reach under the belt to do this, but that’s what you have to do. Even when you add oil in the future after the specified amount of use between oilings, you still use a full 1 ounce of oil in reapplying the silicone oil. Never, ever use petroleum oil of any sort or you will damage the rubber tread. Silicone oil does not damage rubber and has no petroleum in it. You can order more silicone treadmill oil by searching for it at Amazon. It’s sold in mostly 4 ounce bottles, and some in 1 ounce bottles. Select a brand that has reviewers who say the oil is very viscous/thick, not thin. Thick or viscous oil is the only kind you should use or you will have a mess and the lubrication won’t last as long.I will provide an update once we’ve had a chance to use this for some number of weeks or months. I can say for sure that this unit is definitely very heavy duty, very sturdy, and well-built. And unlike most on the market, the belt is about 20” wide not 16”. That makes a big difference for taller people (I am 6’ 1”) using the treadmill. Their feet don’t run off the edge. Also, many other treadmills have had a problem with jerky changes of speed. This one is super smooth speed up and slow down and has no faults whatsoever. For anyone who wonders about power consumption, I measured it since Amazon’s site does not have any such information. This unit takes about 50 W at speed 1mph, and 300 W at max speed 6mph. The power varies very little as you are walking or jogging.In conclusion, I docked this review rating by one star because the instructions are horrible, especially Step 3, which causes the console connector and/or cable to get crushed, which causes damage that has to be repaired.Except for that I would give this a five star rating, so far, and I recommend this over almost any other treadmill as long as you don’t mind having no adjustable incline.

seria bueno incluyera mas programas de ejercicios, asi como elevación

Due to covid the delivery was to our condo building entrance , not to our condo. The driver was very good and offered his rider to get it to our condo. It needs two to maneuver it and if you want this to be in a certain space, assemble it there, do not assemble then try to move it. The assembly is straightforward and the thing to be careful of is the connection of the control cable, check inside the socket to make sure the pins are straight, ours was bent and it would not work at all at first. We chose this as we are both 250lbs each, and it has a nice wide belt to walk/jog on. So far so good after 3 weeks use, it is not a bells and whistle machine, but built for robustness and simple use. make sure you lubricate the belt before use as instructed, and we ordered another bottle at same time as ordering the machine.

Was easy to set up. A solid machine that works very well. The width of the belt is good, comfortable. The screen has basic functions only.